TwitterLineFacebook

Today we’re going to show you two different methods you can use to create your own yumekawaii or yamikawaii syringe accessory!

ゆめかわ工作♡注射器アクセサリーの作り方!100均DIY

🎀Yumekawa Syringe Accessory🎀

Pompom Syringe💉💖

You can easily make a kawaii pompom syringe!

We’ll show you how to make a cute filled syringe without using resin.

🎀You Will Need🎀

🍓Syringe, Pompoms, Cloth

(Others)Perforation tool, chain, chain loops, decorations etc

🎀How To Make🎀

1.💘Drill a hole in the syringe

Create a hole to insert a chain in using your perforation tool. Don’t use too much force, as this can be dangerous and risk injury. Slowly open up the plastic to create a hole.

Insert the metal loops through the hole to attach the chain.

2.💘Preparing the syringe

Remove the stopper within the syringe, since it isn’t very cute!

Replace this by covering the groove with hot glue using a glue gun.

3.💘Inserting the pompoms

Now insert pompoms or cloth inside the syringe.

 

You can make it even cuter by inserting a shiny material! Roll it into a cylinder so that the over side of the fabric can’t be seen.

 

Resin Syringe Accessory🌈✨

Now we’ll show you how to create a dreamy, sparkly accessory using resin💉🌈

🎀You Will Need🎀

🍓Syringe, Resin or substitute (epoxy, adhesive etc)

(Others)Glitter, perforation tool chain, chain loops, decorations

🎀How To Make🎀

1.💘Drill a hole in the syringe

Create a hole to insert a chain in using your perforation tool. Don’t use too much force, as this can be dangerous and risk injury. Slowly open up the plastic to create a hole.

2.💘Preparing the syringe

Remove the stopper within the syringe, since it isn’t very cute. Replace this by covering the groove with hot glue using a glue gun.

3.💘Make the resin colour

Add your chosen colours to the resin or substitute. You can also mix in glitter and sparkles.

(※When using resin, wear a mask and gloves. Make sure not to directly touch the resin or inhale the resin gasses.)

4.💘Pour the resin into the syringe

5.💘Decorating

Add your decorations to the syringe. You can attach a dangling charm or ribbons using hot glue or adhesive. 

Before the resin sets, insert the wire charm into the syringe. Seal the tip using hot glue.

Arrange it however you like!💖

Try creating your own original DIY accessory using your favourite decorations🐻🍯

TwitterLineFacebook